UL4200AReady

Rules verified November 2026

16 CFR § 1263.4 Table 1: coin battery warning letter sizes for all 8 PDP tiers

For labels required on packaging of button cell and coin batteries, “text size must be dependent on the area of the principal display panel” and “must be determined based on table 1” (16 CFR § 1263.4(a)(7)). Here is the table with exact conversions.

TierPDP areaSignal word “WARNING”Statement of hazardOther text
10-2 in²
0-13 cm²
3/64"
0.046875 in
1.190625 mm
3.375 pt cap
3/64"
0.046875 in
1.190625 mm
3.375 pt cap
1/32"
0.03125 in
0.79375 mm
2.25 pt cap
2+2-5 in²
+13-32 cm²
1/16"
0.0625 in
1.5875 mm
4.5 pt cap
3/64"
0.046875 in
1.190625 mm
3.375 pt cap
3/64"
0.046875 in
1.190625 mm
3.375 pt cap
3+5-10 in²
+32-65 cm²
3/32"
0.09375 in
2.38125 mm
6.75 pt cap
1/16"
0.0625 in
1.5875 mm
4.5 pt cap
1/16"
0.0625 in
1.5875 mm
4.5 pt cap
4+10-15 in²
+65-97 cm²
7/64"
0.109375 in
2.778125 mm
7.875 pt cap
3/32"
0.09375 in
2.38125 mm
6.75 pt cap
1/16"
0.0625 in
1.5875 mm
4.5 pt cap
5+15-30 in²
+97-194 cm²
1/8"
0.125 in
3.175 mm
9 pt cap
3/32"
0.09375 in
2.38125 mm
6.75 pt cap
5/64"
0.078125 in
1.984375 mm
5.625 pt cap
6+30-100 in²
+194-645 cm²
5/32"
0.15625 in
3.96875 mm
11.25 pt cap
7/64"
0.109375 in
2.778125 mm
7.875 pt cap
3/32"
0.09375 in
2.38125 mm
6.75 pt cap
7+100-400 in²
+645-2,581 cm²
1/4"
0.25 in
6.35 mm
18 pt cap
5/32"
0.15625 in
3.96875 mm
11.25 pt cap
7/64"
0.109375 in
2.778125 mm
7.875 pt cap
8+400 in²
+2,581 cm²
1/2"
0.5 in
12.7 mm
36 pt cap
1/4"
0.25 in
6.35 mm
18 pt cap
5/32"
0.15625 in
3.96875 mm
11.25 pt cap

“+2-5” means more than 2 and up to 5 in²: a PDP of exactly 2.0 in² is tier 1; 2.01 in² is tier 2. Millimetres = inches × 25.4 exactly; points = inches × 72. The cm values in the eCFR are “for reference only”.

Letter height is cap height, not font size

The table sets the height of the letters. Designers set type in points, which measures the em box, not the capitals. Helvetica and Arial capitals are 0.718 em tall, so a 1/8″ (9 pt) capital needs about 12.5 pt type, roughly 1.4× the cap height. Setting 9 pt type would leave the capitals at only about 6.5 pt (2.3 mm) and fail.

The signal word and safety alert symbol, § 1263.4(a)(4) to (6)

  • The safety alert symbol (exclamation mark in a triangle) precedes “WARNING”, sits on the same baseline, and is at least as tall as the signal-word letters.
  • “WARNING” and the symbol are black on an orange background, unless that conflicts with legibility/contrast or only one colour is printed; then they must contrast with the background.
  • “WARNING” is sans-serif, upper case only; certain message words are bold capitals as shown in the figures.

Figure 1 label on the PDP, § 1263.4(b)(1)

The principal display panel must carry the Figure 1 label with an icon “at least 8 mm (0.3 inches) in diameter”. The Figure 1 text reads:

WARNING
• INGESTION HAZARD: DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH OF CHILDREN
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
• For treatment information call: 1-(800) 498-8666.

When space prohibits, § 1263.4(b)(2)

“If space prohibits the full warning label shown in figure 1”, put the Figure 2 icon on the PDP (at least 20 mm in diameter) and the Figure 3 text on the secondary display panel:

WARNING INGESTION HAZARD • DEATH or serious injury can occur • A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours • KEEP new and used batteries OUT OF REACH OF CHILDREN • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body • For treatment information call: 1-(800) 498-8666.

The validator lays Figure 1 out at the Table 1 minimums using real Helvetica metrics and reports whether it fits your warning area; if not, it switches to the split and checks that a 20 mm icon fits.

Retail battery packs, § 1263.4(b)(3) and (b)(4)

Retail packages of batteries must also address, on the PDP or SDP:

  • Keep in original package until ready to use.
  • Immediately dispose of used batteries and keep away from children. Do NOT dispose of batteries in household trash.

Battery packaging included separately with a consumer product needs only (b)(1) and (b)(2); the (b)(3) statements are not mandatory (§ 1263.4(b)(4)).

Questions sellers ask

Which Table 1 tier applies to a 2 x 3 inch blister card?

The PDP area is 6 in², which falls in the “+5-10” column: WARNING at least 3/32 inch (2.381 mm), statement of hazard at least 1/16 inch (1.588 mm), other text at least 1/16 inch.

Is the Table 1 height the font size?

No. It is the height of the letters. For Helvetica or Arial, set the font size at about 1.4 times the required capital height in points.

How big must the keep-out-of-reach icon be?

At least 8 mm (0.3 inch) in the full Figure 1 label, and at least 20 mm when it stands alone on the PDP under the § 1263.4(b)(2) split.

Check your own package now: the free validator ($0, no signup) computes all of this from your PDP size.